GSP1

GSP1 gas detectors are reliable detectors for the detection of gas leaks (flammable gases) in gas pipes as well as connection pieces and fittings, gas meters, gas burners and gas tanks.





GSP1 provides visual indication of detected gas concentrations. The concentration of the detected gas is indicated by the luminous band (LEDs). An audible alarm function can be activated, if required. The frequency of the audible signal increases with increasing gas concentrations.

The gas detectors GSP1 are not explosion-protected and may therefore not be used in explosive atmospheres/hazardous locations.

The GSP1 is calibrated for methane (CH4). Other gases are also indicated, but the values differ from the sensor characteristic. The deviation is relatively small in the case of CxHy gases (butane, propane, etc.).

The default alarm threshold of > 2,000 ppm (methane) (continuous tone if audible alarm is active) can be changed within the specified detection range.

The GSP1 gas detectors feature a protection function against sensor poisoning which automatically switches off the sensor at excessive gas concentrations (> 2,000 ppm CH4). This helps to protect the sensor from destruction.

The high-quality sensor features auto-calibration. However, it is possible to perform manual zero correction via a button at any time.

Further functions, properties and features:

  • Ergonomic design
  • Fast and reliable detection of flammable gases
  • Flexible gas probe for use in spaces difficult to access
Contact to us